Estella

Maximize your pool usage throughout the year with a Heat Pump! Heat Pumps absorb 80% of the heat in the air to help heat the pool, which not only helps maximize your pool usage throughout the year, but also provides a lower running cost. This allows your pool to stay consistently warm and comfortable for you to swim in, regardless of the outside weather temperature.

With the smallest footprint in the market our AstralPool ICI Gas Heaters have the option of Natural or LPG gas and are available as either a 200mj/h or 400mj/h to suit your pool needs. The ICI is the only full-modulating mid-efficiency heater on the market, meaning that it can modulate its heating capacity to ensure a smooth steady control of heat to the water. This can assist with not only increasing the life of the product but also reduce maintenance costs. With a reduced number of components servicing and installation is also easier.

Our Plumbing Skids have been designed for not only a quicker but also a more cost effective install process.

Available as an upgrade for our Econo & Gold Packages, the Plumbing Skid is delivered to site with the pool equipment already pre-plumbed, pressure tested and already electronically pre-programmed.

The Plumbing skid measures 2,200mm x 905mm x 1,345mm and comes in Monument Grey.

*Image shown of Plumbing Skid with Gold Equipment Package, Heat Pump and Spa Jet Pump Upgrade.

*Available in Victoria only*

NanoTek® Solar is ideal for those with minimal roof space but seeking maximum heat output. Certified to SRCC 100-2014-07 and designed to withstand the harsh Australian climate, this solar system allows you to enjoy the same heat output with 40% less coverage.

Our CA300 Media Filter is used with components of Fine and Super Fine Glass Media. With its compact size, this filter system is used in conjunction of Glass instead of Sand. This being as Glass Media is harder than sand so it will last longer and filter better, making the water clearer and cleaner. In addition to this, it also traps dirt better than Sand, as Sand has a more rounded edge.

Please note this system can only be used if you have access to waste (sewer), in cases where you don’t, please refer to our ZX250 Cartridge Filter.

The TX35 cleans both the walls and floor of your Plunge Pool with a 2.5 hour cleaning cycle, leaving your Plunge Pool looking clean and ready for use. With front scrubbing brushes the TX35 provides a deep clean to remove debris that is stuck on the walls and on the floor. Installation is easy with Plug and Play technology and a large handle to make removal of the TX35 from your Pool easy.

Take your Plunge Pool to the next level with our Jet upgrade. Imagine melting away your daily stresses against our relaxing Jets. In this upgrade, 6 Jets are added to your Plunge Pool.

Control your Plunge Pool anytime, anywhere with the Internet Gateway Module. Working in conjunction with the Viron Connect 10, the Internet Gateway allows an ethernet connection or Wi-Fi connection from your Connect 10 unit to your home router. Once connected, installation is easy! Simply download and use the ‘Connect My Pool App’ on your mobile device and start controlling your Plunge Pool anytime, anywhere!

The Atom Multicolour LED Light is the perfect addition for your Plunge Pool! With 8 colour options to choose from, the Atom LED light is sure to enhance your pool! With the Atom light we also include a Light Transformer which is an essential element to any vessel of water that contains a light. A Light Transformer changes power from AC to DC power and therefore changes the power to a lower voltage, making it safe to use your Plunge Pool.

Please note that one light is included as standard in each Plunge Pool, but there is the option to add another

The Valve Actuator is an important addition if adding solar or another heating source to your Plunge Pool, it works as a diverter. It works like this, if you have Solar and a Heat Pump connected to your Plunge Pool, the valve will only open when the roof temperature is 4 degrees above the pool temperature, letting the Solar system heat your Pool. In cases where it is less than 4 degrees, the valve will automatically divert, letting your Heat Pump heat your Plunge Pool. The valve will only open when going into Solar mode, in all other conditions the Valve Actuator is in the closed position. * Conditions apply.

Our 20mm thick Soft Covers are a popular option for those wanting to use their Plunge Pool all year round. Made from a closed-cell, polyethylene foam these covers not only reduce water evaporation but also reduce your pools running cost. The 20mm Soft Covers have been independently tested and have been proven to retain heat and prevent less evaporation than a hard cover making it a popular option for Plunge Pool owners. Our Soft Covers are most often purchased along with one of our heating sources (Heat Pump, Gas Heater or Solar).

Our Hardcovers are a popular option for those wanting to use their Plunge Pool 365 days a year, as it is often purchased along with one of our heating sources (Heat Pump or Gas Heater). With an internal of insulated foam (to help keep the warmth in your Plunge Pool), our Hardcovers are chemical and UV resistant.

Available only for Delta, Luna & Nova Plunge Pools

Perfect for those wanting to take their Plunge Pool to the next level is our Super Swim Pole system. Take exercise to the next level with this easy to use swimming tool. The Super Swim Pole is a rod that sits on the end of the Plunge Pool that connects to a rope and harness. Once in the pool, attach the harness around your waist and adjust the length of the rope. The way it works is that once you start swimming, the pole and rope will hold you back so you never reach the end of the pool (looks a bit like a fishing rod). this Upgrade is a great option for those who want to keep fit but can’t fit a swimming pool in their backyard, plus this is a cheaper alternative to swim jets. Even better the swimming experience will be better as there will be no water in your face as you swim (as opposed to swimming against swim jets).